(888) 979-5190 Toll-Free
WEG 01536OT3E215T IDI_182563

WEG 01536OT3E215T ODP Electric Motor

WEG 01536OT3E215T General Purpose Motor, 208 to 230/460 VAC, 38.5 to 34.8/17.4 A, 11 kW, 15 hp, 3600 rpm Speed, 60 Hz

WEG 01536OT3E215T General Purpose Motor, 208 to 230/460 VAC, 38.5 to 34.8/17.4 A, 11 kW, 15 hp, 3600 rpm Speed, 60 Hz 01536OT3E215T

The W01 motor is the perfect option for applications that require robustness, low weight and high performance in a single-product. The W01 rolled steel platform has good thermal performance and easy installation and maintenance. With steel plate frame and aluminum flange, these versatile motors provide torque and durability for applications where dirt and humidity are minimal.
The A Series is a legacy product developed to interchange with ITT/Standard X-Change. Its non-ferrous design (brass shell) is ideal for water to water, including sea water cooling applications. This unit is not recommended for new applications.

Amperage Rating      :      38.5 to 34.8/17.4 A
Bearing Type      :      Ball
Dimensions      :      17.165 in L
Efficiency      :      91 %
Frame Size      :      215T
Frequency Rating      :      60 Hz
HP Rating      :      15 hp
Insulation Class      :      F-Grade
Material      :      Rolled Steel
Motor Enclosure Type      :      ODP
Mounting Type      :      Foot
Number of Speeds      :      1
Phase      :      3
Power Rating      :      11 kW
Rotation Type      :      CW, CCW
Service Factor      :      1.15
Shaft Size      :      1-3/8 in Dia x 3-3/8 in L
Speed Rating      :      3600 rpm
Temperature Rating      :      40 deg C
Voltage Rating      :      208 to 230/460 VAC
  • F1 mount as standard
  • Aluminum end shields
  • Cast iron flanges for improved strength
  • Internal bolts, giving a clean surface to the motor, avoiding trapping materials and allowing easy paint job after assembly to the load if required
  • Double shielded ball bearings on frames 56 to 213/5T
  • New ventilation system for improved thermal performance
  • Robust feet design suitable for tougher applications
  • New and more robust eyebolts design (frames 182/4T and up) plus a second eyebolt on non-drive end allowing vertical lifting capability (frames 213/5T and 254/6T)
  • Oversized diagonally split aluminum terminal box that exceeds IP55 requirements
  • Terminal box rotatable in 90 deg increments for flexibility during installation
  • Color coded leads as standard for easy wiring
  • Regreasable ball bearings on 254/6T frame as standard
  • Bearing cap as standard on flanged motors, optional on non-flanged
  • Motor frame painting system 500 hr salt spray-resistant