Anderol 4068 S is a synthetic gear and bearing compressor oil designed with synthesized hydrocarbon fluid and select additives to enhance oxidation resistance to provide maximum protection against wear, rust, corrosion and foaming. The synthesized hydrocarbon fluids in this oil provides better thermal and oxidation stability, as well as increased protection against the loss of viscosity. This oil provides greater film thickness at higher temperatures and lower viscosities for easy start-up and minimal internal friction at lower temperatures. It also reduces power consumption and gearbox operating temperature, prolonging useable life of this lubricant.
Physical properties for this oil include:
ISO Grade of 68
AGMA Number of 2
Specific Gravity of 0.857
Viscosity of:
64.6 cSt at 40℃
10.1 cSt at 100℃
329 SUS at 100℉
60. 4 SUS at 210℉
Viscosity Index 143
Anderol 4068 S compressor oil is compatible with the following materials:
Essentially all seal materials
Plastics
Paints including:
Nitrile Buna N
Neoprene
Viton
Teflon
Polyethylene
Polyurethane ether
Fluorocarbon
Anderol 4068 S is recommended for use under severe high or low temperature conditions when lubricating industrial enclosed gears and heavily loaded plain or rolling element bearings, and applications where high oil temperatures result in short life or high maintenance costs.
CompressorParts.com proudly offeres high quailty, after market products as value priced alternatives to the parts and products sold by original equipment manufacturers. We are confident you will be completely satisfied and find our products to be fully equivalent in specification performance to the OEM products which we identify for your convenience on this site. We have no relationship with any of the OEMs identified on these pages, and we have no incentive to promote one OEM over another. Our substitute products are not made, tested or edorsed by the respective OEM indicted as the supplier of the product for which we sell an after market alternative.