Air System Products Robo Drain RD11-LP15 No-Loss Drain Valve

Air System Products RD11-LP15 Zero Air Loss Condensate Drain Valve With 15 psig Low Control Pressure Design

Air System Products RD11-LP15 Zero Air Loss Condensate Drain Valve With 15 psig Low Control Pressure Design RD11-LP15

A fully automatic, zero loss drain that protects compressed air systems with out the need for electricity. Translucent reservoir for visual assurance of operation. Ideal to be used along with oil/water separators. Condensate enters the drain through one-of two-inlet connections. As condensate is collected and the translucent reservoir fills, a stainless steel float mechanism rises. When the condensate reaches a design level, the float mechanism actuates an isolated magnetic trigger assembly. The trigger assembly directs control air to the valve actuator, which in turn opens a full-port drain valve. Condensate will then exit the unit. As the float drops, the trigger assembly closes the control air line and the valve actuator closes the ball valve. The drain is then returned to the collection mode.
Air System Products Zero Air Loss Condensate Drain Valve With 15 psig Low Control Pressure Design, Series: RD11, 3/4 in Inlet Connection, NPT Inlet Connection, 1/2 in Outlet Connection, NPT Outlet Connection, 0 to 250 psi, 32 to 180 deg F Operating, 24 oz Discharge per Cycle, Aluminum/Composite Reservoir, FKM Seal/Stainless Steel Seat Softgoods, Bronze Valve, 8.44 in H x 13 in W x 9.09 in D

Dimensions      :      8.44 in H x 13 in W x 9.09 in D
Discharge per Cycle      :      24 oz
Inlet Connection Size      :      3/4 in
Inlet Connection Type      :      NPT
Operating Temperature      :      32 to 180 deg F
Outlet Connection Size      :      1/2 in
Outlet Connection Type      :      NPT
Pressure Rating      :      0 to 250 psi
Reservoir Material      :      Aluminum/Composite
Series      :      RD11
Softgoods Material      :      FKM Seal/Stainless Steel Seat
Valve Material      :      Bronze
  • External pneumatic condensate drain for compressed air systems
  • Large 24 oz capacity discharge
  • Isolated trigger assembly
  • Heavy-duty industrial drain
  • Horizontal low profile
  • Non-clogging, full-port drain valve
  • Reliable design - unaffected by contaminants
  • One-unit works for multiple compressed air systems, saves valuable air, saves money
  • Fits in tight spots - can be mounted under equipment
  • Easy to see condensate level "quick check"
  • Handles scale and rust without clogging
  • No electricity required
  • Operates on demand
  • pdfInstruction/Installation Manual https://assets.unilogcorp.com/267/ITEM/DOC/Air_System_Products_RD11_Instruction_Installation_Manual.pdf
  • pdfTechnical Drawing https://assets.unilogcorp.com/267/ITEM/DOC/Air_System_Products_RD11_Technical_Drawing.pdf