Van Air Systems HLSXA-150-12VDC Explosion Proof Heatless Desiccant Air Dryer

VAN AIR® HLSXA Series 81-2414 Explosion Proof Heatless Desiccant Air Dryer, 1 in Inlet Connection, 150 scfm Air

VAN AIR® HLSXA Series 81-2414 Explosion Proof Heatless Desiccant Air Dryer, 1 in Inlet Connection, 150 scfm Air 81-2414

Van Air Systems HLSXA regenerative desiccant compressed air dryers deliver extremely dry compressed air in the harshest and most challenging operating environments, where safety and performance are of central importance. HLSXA dryers are explosion-proof and have been designed to operate in areas classified as hazardous, class 1 division 1, groups C and D, per the National Electric Code. In the oil and gas and petrochemical industries, operators often rely on compressed air to run essential equipment and instrumentation within confined spaces where explosive gases may be present. In these environments, all equipment must be designed to eliminate the possibility of spark generation and explosions. All electrical enclosures and components on HLSXA have been designed and tested with these conditions in mind. HLSXA dryers remove water vapor from saturated compressed air through the process of pressure swing adsorption. Each dryer consists of two desiccant columns. While one column is on-line drying compressed air, the other column is regenerated using a portion of depressurized purge air. The flow of process and purge air is automatically and continuously switched between the two desiccant columns by an integrated timer. Pressure dew points of -40 deg or lower can be achieved with a properly sized HLXA dryer. HLSXA dryers meet the limits of moisture content in compressed air, as defined by the International Society for Automation (ISA) publication 7.0.1-1996. HLSXA dryers are available in flow capacities of 55 to 800 standard cfm and 100 psig, with control voltages of 115 V or 12 VDC and a standard design pressure of 250 psig. Non-standard capacities, please contact the Van Air Systems factory.
VAN AIR® Explosion Proof Heatless Desiccant Air Dryer, 1 in Inlet Connection, 1 in Outlet Connection, 100 deg F Inlet Air Temperature, Air Flow Rate: 150 scfm, 80 to 250 psig Air Pressure,-40 deg F Dew Point Temperature, 40 to 120 deg F Maximum Temperature, Aluminum Housing, Activated Alumina Desiccant, 87 in Overall Height, 29 in Overall Width, 27 in Overall Depth

Air Flow Rate      :      150 scfm
Air Pressure      :      80 to 250 psig
Desiccant Material      :      Activated Alumina
Dew Point Temperature      :      -40 deg F
Housing Material      :      Aluminum
Inlet Air Temperature      :      100 deg F
Inlet Connection Size      :      1 in
Maximum Temperature      :      40 to 120 deg F
Outlet Connection Size      :      1 in
Overall Depth      :      27 in
Overall Height      :      87 in
Overall Width      :      29 in
  • Explosion-proof controls, class 1 division 1 groups C and D NEMA 4/7
  • 250 psig maximum working pressure
  • Small footprint for convenient installation
  • pdfCatalog https://assets.unilogcorp.com/267/ITEM/DOC/VAN_AIR_81_2368_Catalog.pdf